1998-2002 上海交通大学 博士
1995-1998 郑州大学 (郑州工业大学) 硕士
1991-1995 东北林业大学 学士

2002-2005 上海交通大学 师兄一前一后rh 讲师
2005-至今 上海交通大学 师兄一前一后rh 副教授

2006.6-2006.9 澳大利亚 La Trobe University 访问学者
2009.4-2009.10 美国 Purdue University 访问学者
2013.1-2013.12 美国 The Ohio State University 研究学者

1、精密与超精密制造技术
2、加工表面完整性预测与控制
3、抗疲劳制造机理

2021-2024：国家自然科学基金项目, NSFC No. 52075335，负责人
2023-2024: 曼罗兰印刷设备（深圳）有限公司项目，No.23H010104171, 负责人
2020-2021：武汉市环境保护科学研究院项目，20H300000348，20H300000349，负责人
2019-2020: 国家教育部专项资助项目，18JDGC026，负责人
2019-2020: 上汽通用汽车有限公司项目：2020310031003542，负责人
2017-2020：国家自然科学基金项目,NSFC No.51675339，负责人
2017-2019：PTME与上海交大合作智能制造技术开发项目，子课题负责人
2016-2017：上海汽车工业科技发展基金，No.1614，负责人
2016-2017：机械系统与振动国家重点实验室2016年度自主课题重点课题，No.GKZD020021/006，负责人
2016-2020：国家自然科学基金重点项目，NSFC No.51535007，骨干研究人员
2015-2018：国家自然科学基金项目，NSFC No.51474299，骨干研究人员
2012-2015：国家自然科学基金项目,NSFC No. 51175331，负责人
2012-2014：上汽通用五菱，SGMW发动机精密制造技术（2微米工程）项目，骨干研究人员
2012-2014： “十二五”国家科技支撑计划,No.2012BAF06B03,骨干研究人员
2013-2014：上海汽轮机厂有限公司科研项目，负责人
2012-2013：上海轴承研究所科研项目，负责人
2008-2010：国家自然科学基金项目，NSFC No. 50705061，负责人
2009-2010：轴套类精密复合数控磨床， 国家项目， 副组长
2009-2012：国际合作项目（合作单位：佐治亚理工），负责人
2007-2009：***操控性和可靠性的分析研究，国家项目，骨干研究人员
2006年： ***动平衡支承技术研究, 国家项目，负责人；
2006年： ***多体转动部件的耦合动力学分析，国家项目，负责人；

专著：
1. 张雪萍，吴少海. 《思维力与创造力》，上海交通大学出版社，2023.12 (第一版). 书号：ISBN 978-7-313-30071-3

参加编著：
1. 姚振强，张雪萍.《敏捷制造》，机械工业出版社，2004.8(第一版).书号：ISBN 7-111-14628-X/TH.1470.
2. 王成焘，姚振强，陈铭.《汽车摩擦学》,上海交通大学出版社，2002.12(第一版).书号：ISBN 7-313-03296-X/U.108.(编写第七章《轮毂轴承》)
3. 朱平，《制造工艺基础》,上海交通大学出版社，2018年（第一版).书号：ISBN 978-7-111-61055-7（编写第10章《机械加工工艺规程》）

期刊论文：
Xin Li, Xueping Zhang*, Zhenqiang Yao. Surface Generation and Material Removal Mechanism Incorporated with the Randomness of Grain Size and Distribution in Grinding Process. Precision Engineering. 2024, 86(3): 30-47.

Peiqiang Yang, Xueping Zhang*, Zhenqiang Yao, Rajiv Shivpuri. Investigation on the Crystal Plasticity of α Phase Ti-6Al-4V Based on Nano-indentation Simulation and Experiment. Materials Characterization, 2023, 202(9), 113074.

Xin Zhang, Xueping Zhang*. Free-Floating Dynamic Material Removal Mechanism of the Honing Process. The International Journal of Advanced Manufacturing Technology. 2023, 127(8): 4473-4489

Xin Zhang, Xijuan Liu, Xueping Zhang*. Oilstone Processing and Its Impact on the Surface Texture of Cylinder Bore. ASME Transaction, Journal of Tribology. June, 2023, Vol. 145(6): 061702

Burhan Afzal, Xueping Zhang, Anil Srivastava. Enhanced hybrid model to predict the surface roughness of honed cylinder bore. ASME Transaction, Journal of Tribology. 2021, 143(12): 011802:1-12, doi:10.1115/1.4052280.

Xueping Zhang, Zaoyang Zhou, Zhenqiang Yao, Lifeng Xi. Analytically predicting multi-dimensional accuracy of honed engine cylinder bore. ASME Transaction, Journal of Tribology. 2020,142（9）：091201：DOI: https://doi.org/10.1115/1.4046677.

Xueping Zhang, Xijuan Liu. A new framework to explore the international vision of college teacher. International Journal for Innovation Education and Research. Vol. 8 (7): 300-310, 2020. DOI: https://doi.org/10.31686/ijier.vol8.iss7.2478

Zaoyang Zhou, Xueping Zhang, Kunlun Lv, Jun Wu, Zhenqiang Yao, Lifeng Xi. Honed surface multi-scale prediction based on multi-stage honing process of engine cylinder bore. ASME Transaction, Journal of Tribology. Vol. 142(1), 011802:1-12, January, 2020.

Liu S., Jin S., Zhang X.P., Chen K., Tian A., & Xi L.F. A Coupled Model for the Prediction of Surface Variation in Face Milling Large-Scale Workpiece With Complex Geometry [J]. Journal of Manufacturing Science and Engineering-Transactions of the ASME, 2019.141(3):031009-14.

Jin, S., Liu, S., Zhang, X.P., & Chen, K. A unified prediction model of 3D surface topography in face milling considering multi-error sources [J]. International Journal of Advanced Manufacturing Technology, 2019.102(1):705-717.

Xun Ma, Wubin Xu, Xueping Zhang, Siyi Ding. Influences of journal with 3D form errors on dynamic coefficients of hydrodynamic bearings yielded to JFO boundary conditions. Journal of Engineering Tribology. May 31, 2018. https://doi.rog/10.1177/1350650118779299.

Shun Liu, Sun Jin, Xueping Zhang, Kun Chen, Ang Tian, Lifeng Xi. A coupled model for the prediction of surface variation in face milling large-scale workpiece with complex geometry. Journal of Manufacturing Science and Engineering, November, 2018 (doi:10.1115/1.4042188).

Liu S., Jin S., Zhang X.P., Tian A., Chen K., & Xi L.F. Prediction of Surface Variation Field in Face Milling via Finite Element Model Updating with Considering Force-Deformation Coupling [J]. International Journal of Advanced Manufacturing Technology. November 13，2019.

Liu, S., Jin, S., Zhang, X.P., Chen, K., Wang, L.X., & Zhao, H.B. Optimization of 3D surface texture by milling for adhesive-sealing [J]. Procedia CIRP, 74 (2018) 279–284.

Xun Ma, Wubin Xu, Xueping Zhang, Fuyong Yang. Effect of form errors on oil film characteristics of hydrodynamic journal bearings based on small displacement torsor theory. Industrial Lubrication and Tribology, November, 2018. https://doi.org/10.1108/ILT-05-2017-0140

Shun Liu, Sun Jin, Xueping Zhang, Kun Chen, Lixin Wang, Hongbo Zhao. Optimization of 3D surface roughness induced by milling operation for adhesive-sealing, Procedia CIRP 71, 2018: 279-284.

Zaoyang Zhou, Xueping Zhang, Kunlun Lv, Guangya Li, Jun Wu, Zhuang Lu. Predicting microscale cross-hatched surface texture in engine cylinder bore. Procedia CIRP 71, 2018: 272-278.

Xueping Zhang, Xiaoqing Wang, Daming Wang, Zhenqiang Yao, Lifeng Xi and Xiaojuan Wang. Methodology to improve the cylindricity of engine cylinder bore by honing. Transactions of ASME, Journal of Manufacturing Science and Engineering. 2017, 139(3) 031008-031008-10. (Doi: 10.1115/1.4034622).

Xueping Zhang, Rajiv Shivpuri, Anil K. Srivastava. Chip Fracture Behavior in the High Speed Machining of Titanium Alloys. Transactions of ASME, Journal of Manufacturing Science and Engineering. 138(8), 081001:1-14,2016.

Xueping Zhang, Shubiao Wu. Chip Control in the Dry Machining of Hardened AISI 1045 Steel, The International Journal of Advanced Manufacturing Technology, PP.1-9, 20 June, 2016. (Doi: 10.1007/s00170-016-8989-2).

Xueping Zhang, Rajiv Shivpuri, Anil K. Srivastava. Role of phase transformation in chip segmentation during high speed machining of dual phase titanium alloys. Journal of Materials Processing Technology. Vol. 214, 2014(12): 3048-3066.

Liang Ding, Xueping Zhang, C.Richard Liu. Dislocation density and grain size evolution in the machining of Al6061-T6 alloys. Transactions of ASME, Journal of Manufacturing Science and Engineering, 2014, DOI: 10.1115/1.4027675.

Xia Ji, Beizhi Li, Xueping Zhang, Steven Y. Liang. The effect of minimum quantity lubrication (MQL) on machining force, temperature, and residual stress. International Journal of Precision Engineering and Manufacturing. Vol.15 (11), 2014. p.2443-2451.

Xia Ji, Xueping Zhang, Steven Y. Liang, Predictive modeling of residual stress in minimum quantity lubrication machining. The International Journal of Advanced Manufacturing Technology. 2014, Vol.70, Issue 9-12(2): 2159-2168.

Xia Ji, Xueping Zhang, Beizhi Li, Steven Y. Liang. Predictive modeling of minimum quantity lubrication: cutting forces, temperature and residual stress. Applied Mechanics and Materials, 2013, Vols. 365-366: 1181-1184.

Xia Ji, Zheng Kang, Xueping Zhang, Steven Y.Liang. A New Methodology to Validate the Cutting Temperature Theoretical Model in Super-finish Hard Machining, Advanced Science Letters, Numbers 4-5, 2011, 1561-1565

Xueping ZHANG, Shenfeng WU, Heping WAHNG and C. Richard LIU Predicting the effects of cutting parameters and tool geometry on hard turning process using Finite Element Method, ASME Transaction, Journal of Manufacturing Science and Engineering, Vol.133（4）, 2011, 041010.

Wang Heping, Zhang xueping. Thermal-mechanical Effect on Temperature/stress Distribution when Orthogonal Cutting Bearing Steel. Progress of Machining Technology. 420-424. Key Engineering Materials Vols. 407-408, 2009.

Lu Guanghui, Zhang Xueping*, Gao Erwei. Experimental Study on the Surface Residual Stresses of GCr15 Component by Super-finishing Grinding and Fatigue Life Prediction, Key Engineering Materials Vol.416（2009）pp 45-50.

Xueping Zhang*, Erwei Gao, C.Richard Liu. Optimization of Process parameter of residual stresses for hard turned surfaces, Journal of Materials Processing Technology, Volume 209, Issue 9, 1 May 2009, 4286-4291）

X.P.ZHANG, H.C.Song, C.R.Liu. White Layer of Hard Turned Surface by Sharp CBN Tool【J】. Journal of Shanghai Jiao Tong University (Science), 2005, 36(4): 377-38620）

X.P.Zhang, C.R.Liu, Z.Q.Yao. Investigational Advances in Residual Stresses by Hard Turning, Materials Science Forum-Advances in Materials Manufacturing Science and Technology, 2004,471-472 (9): 523-527

Xueping ZHANG, Ahmed Hassan，Zhenqiang Yao. Multi-body Contact Modeling and Statistical Experimental Validation for Hub Bearing Unit 【J】，Tribology International，2003,36(7):505-510.

会议论文：
Peiqiang Yang, Xueping Zhang*, Zhenqiang Yao, Rajiv Shivpuri. Evolution of Grain Refinement and Phase Transformation Based on Stress-strain Induced Incremental Model in Machining of Titanium Alloy. Proceedings of the ASME 2023 18th International Manufacturing Science and Engineering Conference. June 12-16, 2023, New Brunswick, New Jersey, USA. (MSEC2023-104620)

Xin Li, Xueping Zhang*, Zhenqiang Yao, Rajiv Shivpuri. Grinding Mechanics Evolution Based on Abrasive-bond Dynamic Contact Behavior. Proceedings of the ASME 2023 18th International Manufacturing Science and Engineering Conference. June 12-16, 2023, New Brunswick, New Jersey, USA. (MSEC2023-104554)

Xin Zhang, Xin Li, Xueping Zhang*, Zhenqiang Yao. Grinding Force Prediction Model by Discretizing Stochastic Grains. Proceedings of the ASME 2023 18th International Manufacturing Science and Engineering Conference. June 12-16, 2023, New Brunswick, New Jersey, USA. (MSEC2023-104618)

Peiqiang Yang, Xueping Zhang, Zhenqiang Yao. Molecular dynamics modeling the nano-indentation of titanium. ASME 16th International Manufacturing Science and Engineering Conference. June 21-25, 2021, Cincinnati, Ohio, USA. (MSEC2021-59982).

Xin Li, Xueping Zhang, Rajiv Shivpuri. Microstructure alteration in the high-speed machining of titanium involved with tool wear and cryogenic condition. ASME 16th International Manufacturing Science and Engineering Conference. June 21-25, 2021, Cincinnati, Ohio, USA. (MSEC2021-59981).

Burhan Afzal, Xueping Zhang, Anil Srivastava. A hybrid physical model based artificial neural network approach to predict surface texture in the honing of engine cylinder bore, Proceedings of the ASME 15th International Manufacturing Science and Engineering Conference. June 22-26, 2020, Cincinnati, Ohio, USA. (MSEC2020-8219).

Ayan Bhattacharya, Xueping Zhang, Rajiv Shivpuri. Molecular dynamics study on the machining of titanium. Proceedings of the ASME 15th International Manufacturing Science and Engineering Conference. June 22-26, 2020, Cincinnati, Ohio, USA. (MSEC2020-8220).

Zaoyang Zhou, Xueping Zhang, Kunlun Lv, Jun Wu, Zhenqiang Yao, Lifeng Xi. Simulating the sequential honing process of engine cylinder bore by modeling abrasives in honing stone. Proceedings of the ASME 2019 14th International Manufacturing Science and Engineering Conference. June 10-14, 2019, Erie, PA, USA. (MSEC2019-3049).

Zaoyang Zhou, Xueping Zhang, Kunlun Lv, Zhuang Lu, Yang Bai, Guangya Wang. Simulation of honing stone surface topography based on its processing. Proceedings of the 13th Asia-Pacific Conference on Materials Processing, 23-27 August, 2018.

Shun Liu, Sun Jin, Xueping Zhang, Changhui Liu, Fuyong Yang, Jiamin Chen. Coupled predicting surface variation by face milling of engine block/head. Proceedings of the ASME 2018 13th International Manufacturing Science and Engineering Conference. June 18-22, 2018, College Station, TX, USA. (MSEC2018-6327)

Xueping Zhang, Rajiv Shivpuri, Anil Srivastava. Microstructure sensitive flow stress based on self-consistent method. Proceedings of the ASME International Manufacturing Science and Engineering Conference. June 27-July 1, 2016, Blacksburg, Virginia, USA . (ASME-MSEC 2016-8708).

Xueping Zhang, Shubiao Wu, Zhenqiang Yao, Lifeng Xi., High speed machining of hardened AISI 1045 steel, the 12th Asia-Pacific Conference on Materials Processing, Jinan, China, 16-19 June, 2016.

Xueping Zhang, Rajiv Shivpuri, Anil Srivastava. Role of tool flank wear and machining speed in developing of residual stresses in machined surface during high speed machining of titanium alloys. Proceedings of the 2015 ASME International Manufacturing Science and Engineering Conference. June 8-12, 2015, Charlotte, North Carolina, USA.

Rajiv Shivpuri, Xueping Zhang, Anil Srivastava. Investigation of Material Transformations and their Role in Residual Stress Development in Machined Surfaces, 4th International Conference on Virtual Machining Process Technology (CIRP Sponsored Conference), June 2-5, 2015, Vancouver, BC, Canada.

Xueping Zhang, Rajiv Shivpuri, Anil K. Srivastava. Stress triaxiality in chip segmentation in the high-speed machining of titanium alloy. Proceedings of the 2014 ASME International Manufacturing Science and Engineering Conference June 9-13, 2014, Detroit, Michigan, USA. Manuscript No. MSEC2014-3915.

Long Meng, Xueping Zhang, A.K.Srivastva. Rapid Finite Element Prediction on Machining Process, 2013 ASME International Conference on Manufacturing Science and Engineering. June 10-14, 2013, Madison, Wisconsin, USA.

Liqiang Ding, Xueping Zhang, C.Richard Liu. Finite Element on Dislocation Density and Grain Size Evolution in Machined Surface, 2013 ASME International Conference on Manufacturing Science and Engineering. June 10-14, 2013, Madison, Wisconsin, USA

Xueping Zhang, Shenfeng Wu, C. Richard Liu. Decomposing Thermal and Mechanical Effect on the Residual Stress Profile in Hard Turning Surface by Finite Element Method, 2012 ASME International Conference on Manufacturing Science and Engineering. June 4-8, 2012, Notre Dame, Indiana, USA.

Xia Ji, Xueping Zhang, Y. Steven Liang. A New Approach to Predict Machining Force and Temperature with Minimum Quantity Lubrication, 2012 ASME International Conference on Manufacturing Science and Engineering. June 4-8, 2012, Notre Dame, Indiana, USA.

Xiaojin Xu, Liang Ding, Xueping Zhang. Multi-scale FE modeling Inconel718 machining process and Crack initiation of brittle particle, the 10th Asia-Pacific Conference on Materials Processing, Jinan, China, 14-17 June 2012.

Zhang Xueping, Wu Shenfeng, C.Richard Liu. The periodical fluctuation residual stress in hard turned surface and its relationship with chip formation, ASME MSEC 2011, ( MSEC2011-50197)

Zhang Xiangqin, Zhang Xueping, Anil, K. Srivastava. Predicting the high speed cutting process of Titanium alloy by Finite Element Method. ASME MSEC 2011, ( MSEC2011-50208).

Kang zheng, Ji Xia, Zhang Xueping, Y.Steven Liang, Theoretical modeling of cutting temperature distribution by considering the material thermal properties as a function of temperature, ASME MSEC 2011, (MSEC2011-50216).

Zhang Xueping, Wang Heping，C.Richard Liu, On predicting tool nose radius and lead angle on hard turning process by 3D finite element method, 2010 ASME International Conference on Manufacturing Science and Engineering. October 12-15, 2010, Bayfront Convention Center, Erie, PA

Wang Heping, Wu Shenfeng, Zhang Xueping, C.Richard Liu. On predicting residual stress and chip morphology in pre-strain hard turning, 2010 ASME International Conference on Manufacturing Science and Engineering. October 12-15, 2010, Bayfront Convention Center, Erie, PA

Wu Shenfeng, Zhang Xueping, C.Richard Liu. On predicting rake angle cutting speed and feed rate on chip morphology in hard turning, 2010 ASME International Conference on Manufacturing Science and Engineering. October 1-15, 2010, Bayfront Convention Center, Erie, PA

Ding Kui, Zhang Xue-ping, Hu Jun. Et al. Experimental Research on Sliding and Wear Mechanism of Nickel-coated and Uncoated High Speed Tool Steel against Backing of Abrasive Belt. Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing, September 23-26, 2008, Tianjin, China

Song hechuan, Zhang Xueping, Yao zhenqiang. Nonlinear Contact Modeling and Numerical Analysis of Tapered Roller Bearing Based on Integrated application of CAD/CAE Softwares, 7th International Conference on Frontiers of Design and Manufacturing ,The Joint of “7th Youngs Scientist Conference on Manufacturing “ and “7th S.M.Wu Symposium on Manufacturing Science”, June 19-22，2006 Guangzhou, China.

X.P.Zhang, W.Q.Fan, T.Yu, Z.Q.Yao. Methodological Optimization Design on Rolling-contact Bearing Clearance, New Trends in Engineering Design, Proceedings of 15th International CIRP Design Seminar 2005, May 22-26, 2005, Shanghai, China, 446-450.

Gao Erwei, Zhang Xueping, Yao Zhenqiang. Simulation and Analysis of Flexible Solar Panels’ Deployment and Locking Processes, Journal of Shanghai JiaoTong Univ. (Sci.),2008,13 (3):275-279.

X.P.Zhang, C.R.Liu, Z.Q.Yao. Experimental study and evaluation methodology on hard surface integrity【J】.International Journal of Advanced Manufacturing Technology, 2007,34(8):141-148.

中文期刊：
1. 高罗辉，张雪萍，姚振强. 汽车发动机缸孔珩磨轨迹重构与精度控制. 机械设计与研究，2013，29 (1):75-79.
2. 丁利强, 张雪萍, 姚振强. 汽车曲轴磨削精度的控制方法，机械设计与研究，2013,29(3) 66-69.
张相琴，张雪萍，A.K.Srivastava. Ti6Al4V高速干切削试验与有限元建模，机械设计与研究，Vol.28, 2012(4):101-106.
3. 李振，张雪萍，C.R. Liu.轴承钢硬车削表面残余应力对滚动接触界面疲劳寿命的影响预测,上海交通大学学报,2011，45，66-71.
4. 吴申峰，张雪萍. 淬硬轴承钢锯齿形切屑形成机理研究，上海交通大学学报，2011，45（1）：85-92
5. 王和平，吴申峰，张雪萍. 高速干切削过程的三维有限元仿真与试验分析，机械设计与研究，2011, 27(1): 67-73.
6. 张雪萍，王和平，卢光辉，高二威. 轴承钢顺次磨削表面残余应力离散度试验研究， 机械工程学报， 2010, 46(15): 89-94.
7. 张雪萍，王和平，高二威.基于Deform的单粒磨削仿真与工件表面残余应力离散度分析,上海交通大学学报，2009,43,717-721.
8. 张雪萍，赵国伟，蒋辉等. 精密干切削淬硬零件表面完整性试验【J】，上海交通大学学报，2006，40（6）:0922-0926.
9. 张雪萍，刘中鸿，刘龙权. 滚动轴承超精硬切削参数的优选方法体系，上海交通大学,2004,37(7):80-84.
10. 张雪萍，刘中鸿，刘龙权. 有利于提高硬切削滚动轴承疲劳寿命的残余应力临界条件，工具技术, 2004, 38(5): 19-21.

1、课程名称：Manufacturing Processes (ME451）；本科(全英文授课)； 64学时； 4学分
2、课程名称：Plastic Mechanics in Metal Processing (ME6125)；研究生(全英文授课)；48学时; 3学分
3、课程名称：思维力与创造力 (PSY1103)；本科(公共选修课)；32学时；2学分

软件版权登记：
1. 汽车发动机缸孔珩磨仿真与精度预测软件V1.0. 软著登字第3781899号；No.03864651.
2. 汽车发动机缸孔珩磨加工精度分析软件V1.0. 软著登字第3866640号；No.03935449.
3. 汽车发动机缸孔珩磨失效分析数据库软件. 软著登字第4346710号；No.04503104.

专利（略）

美国机械工程师协会（ASME）会员
高等教育学院会员：(FHEA) Fellow of The Higher Education Academy

2017年度最受欢迎教师奖
2018年优秀论文指导奖